This shade is just as smooth and luxurious as the wool that it is named after. A soft neutral shade that is partnered with Fawn on the Wood Protector range.
Enriching formula for wood that is long lasting and easily applied. Virtually odourless high build product that revives dull looking surfaces.
One coat will produce a translucent finish allowing the wood grain to really show through. A 2nd coat increases the opacity giving a richer deeper colour and a 3rd coat will produce a hard gloss finish.
• Window Frames
• Summer Houses
• Garden Furniture
• External Timbers and Cladding
• Long-lasting protection
• Low VOC (Volatile Organic Compounds)
• Low odour
• Water-based with linseed oil – natural renewable resource
• Translucent – allows wood grain to show through
• Rich long-lasting colour
• Water resistant with mould and fungal protection
• Microporous high-build coating
Coverage: 1 Litre will cover approximately 8m²
Advice: It is recommended that 2 – 3 coats be applied. If 1 coat is to be applied for a translucent look, apply Royal Clear on top to produce a harder surface finish. Protek Royal is a high-build formulation so each extra coat increases the colour and sheen. If applying to bare timber a knotting agent should be used prior to application. When applied to floorboards a top coat of breathable polyurethane sealant or varnish should be applied to protect against heavy foot traffic.
This is a protective water-repellent coating. If your timber isn't treated with a preservative then depending on the type of wood and product, you may want to use our Wood Preserver ++ first.
For light colours, we recommend using our Stain Blocking Primer to prevent the top coat discolouring from possible tannin bleed.