Before applying any of Protek’s products please read and follow the instructions below.

DOS

• Clean weathered and dirty wood using water, household detergent and a stiff brush.

• Allow the wood to dry fully before applying the first coat.

• Remove all loose and flaky wood before applying the first coat

• Some planed (finished) timber may require a light sanding before applying the first coat.

• Allow any previous treatments and coatings to weather before applying any of Protek’s wood stains.

• Allow at least 4 – 6 hours of drying time between applying extra coats.

• Allow 24 – 48 hours of drying time before you subject decking to foot traffic.

• Allow 24 – 48 hours of drying time before you use your garden furniture.

• Allow at least 24 hours of drying time before letting animals back in their housing if the internal walls have been coated.

DON'TS

• Do not apply if wet weather is expected within 48 hours.

• Do not apply in temperature below 8OC.

• Do not apply to wet, damp or frozen wood.

• Do not allow the product (wood stain) to freeze.

• Do not contaminate ponds, waterways or ditches with the wood stain or the container used.

• Do not allow splashes or drips to dry, clean up with water and detergent immediately.

HOW TO APPLY

Protek’s wood stains are easy to apply. The application method is up to you.

Brush, roller or spray application

WOOD PROTECTOR

✔

✔

✔

TOUGH COAT

✔

✔

✔

DECKING STAIN

✔

✔

✔

SHED & FENCE

✔

✔

✔